SMP Bargh Sanaat
Search
ENGLISH

Limit Switch

Limit Switch Details

SMP Limit Switch is designed for a maximum safe operation under severe conditions to become installed at any bulk handling system. Switch enclosure consists of corrosion resistant ;aluminum alloy and stainless steel. All external parts are either made of stainless steel or brass. No maintenance will be required. The trip points can be changed within resp. 15° and 30° by means of adjustable cams. The roller lever is continuously adjustable on shaft. For safety Applications, the lever has to be bolted with shaft.

 

-Limit Switch (LS 100)

- Limit Switch (LS 200)

 

Limit Switch Heavy Duty (High Temprature) -Limit Switch (LS 25)

 

Application:

SMP limit switches are designed for a maximum safe operation under severe conditions to become installed at any Industrial machines. Switch enclosure is made of cast iron. In addition All external parts are made of stainless steel. No maintenance will be required. The trip points is resp. 35° in both sides. The roller lever is continuously adjustable on shaft. For safety Applications, the lever has to be bolted with stainless steel shaft. which is corrosion resistant.

Mounting Instruction:

SMP limit switches (position Switch) of type either LS 25 or LS 35 function is to produce electrical signals corresponding to the positions of moving machinery. The units are suitable for use in virtually any climate or severe condition such as high temperature.

 

 

Limit Switch Heavy Duty (High Temprature) -Limit Switch (LS 35)

 

 

 SMP Advanced Features

Research show that switches are mostly damaged by the equipment’s vibration or the break down in installation place, SMP’s special design is the key to the problem; the lower part of the lever is equipped with internal spline so that the switch will have the better efficacy in unstable situations. Moreover the use of bottom silicon rubber eliminate the vibrations dramatically so that the possible break downs and machine downtime is minimized.

Seal rubbers are made of special silicon which are heat resistant up to 300°c and due to the SMP’s particular design even if the equipment  aren’t fixed properly by the operator, the switch will be protected against dust.

 

LS100 & LS200

 

 

LS25 & LS35